Sliding Gates

FAAC 740 series

  • Used for sliding gate weighing up to 900Kg with
  • Speed 12m/min.
  • The operating motor is 230V-50Hz with absorbed power 500W, current drawn 2.2 A and reduction ratio 1:25 cooling oil.
  • The motor also includes a mechanical limit switch to detect the end of movement of the gate at closing.
  • The speed of motor 1400 rpm with duty cycle 25%
  • A manual release key in case of power failure can operate the gate manually
  • Contrl unit with four operating logic's and possibility to control the closing
  • The system is protected against over load and short circuit via thermal cutout on motor winding

Data Sheet (201KB)

FAAC 844 series

  • Used for sliding gate unlimited length weighing up to 1800Kg
  • Speed 9.5m/min.
  • The operating motor is 220V-50Hz with absorbed power 650W, current drawn 3.5A and reduction ratio 1:30 cooling oil.
  • The motor also consists of an inductive limit switch to detect the end of movement of the gate at closing.
  • The speed of motor 1400 rpm with duty cycle 30%
  • Control unit includes four protection fuses for main circuit, motor, accessories.
  • A customized manual release key in case of power failure shall manually operate motor.
  • The system is protected against over load and short circuit via thermal cutout on motor winding

Data Sheet (131KB)

FAAC 860 series

  • Used for sliding gate for maximum gate length 10m and
  • Weighing up to 1.200 Kg
  • Speed 9.5m/min.
  • The operating motor is 220V-50Hz with absorbed power 600W, current drawn 3A and reduction ratio 1:30 cooling oil.
  • The speed of motor 1400 rpm with duty cycle 30%, o
  • A customized manual release key in case of power failure will manually operate motor.
  • The system is protected against over load and short circuit via thermal cutout on motor winding
  • Control unit with eight operating logic's and possibility to control the closing, opening and pause time
  • The motor include ADL memory card to store the leaf limits electromechanical.

Data Sheet (114KB)

FAAC 884 series

  • Used for sliding gate weighing up to 3500 Kg
  • Speed 10m/min.
  • The operating motor is 230V/400V-50Hz with absorbed power 850W, current drawn 2.7/1.6A and reduction ratio 1:43.2 cooling oil.
  • The motor also includes a mechanical limit switch to detect the end of movement of the gate at closing.
  • The speed of motor 1400 rpm with duty cycle 50%, 100% (2000Kg)operating
  • A manual release key in case of power failure can operate the gate manually.
  • Control unit includes three protection fuses for main circuit, motor, accessories.
  • The system is protected against over load and short circuit via thermal cutout on motor winding

Data Sheet (135KB)

Top