Sun Control

Aerofines :

Aerofins available in different sizes have extruded wing-shaped panel elements, or fins, combining optimal solar effectiveness with a firm and futuristic appearance.

Avilable in Two models :

» Aerofoils & Aerowing «

  • Aluminum extruded wing-shaped profiles.
  • 6 different standard profiles from 200 to 450 mm wide.
  • Fins fixed at a chosen angle between 0 and 180 degrees in increments of 5 degrees .
  • Adjustable fins with motorized operation, suitable for Building Management Systems.
  • V-bracket fixtures, available in 0, 30 and 45 degrees for the 200 - 300AF .
  • Cup bracket fixtures, available in 0, 30 and 45 degrees for the 350 - 450AF .
  • Two standard supporting structures are available, tube or flat bar .
  • Corner solutions are available for fixed systems .
  • Available anodized, in polyester or PVDF coating (RAL) or in wood tones.
  • Fin direction horizontal or vertical
  • System projected horizontally or positioned vertically

Data Sheets : Aerowing (1.62M) _ _ Aerofoils (1.00M)

Panel System :

Panel systems are either roll formed and pre-coated or extruded panels. Available in a verity of sizes and shapes. All systems include an elegant and sturdy support structure.

Avilable in many models :

» 48R & 100 R «

  • Extruded Aluminum panels of 48 &100 mm wide.
  • H Shape and curved panels avilable.
  • Coil coated with UV and scratch resistant Luxacote® coating, available in 14 standard colours.Oher colors on request. (48R).
  • Sun Louvre system can be installed bent or curved to follow the shape of the building (48R).
  • Available anodized or in RAL colors in polyester or PVDF/PVF2 coating (100R)
  • Panels in fixed position on a carrier with various louvre inclinations.
  • Stylish carrier rails with sliding brackets allow a variable module by which openness and shading angle can be selected.
  • Panels can be connected to achieve visually continuous lines.
  • Corner solutions are available.
  • Can also be used as a ventilated façade system. Covering for example installations on rooftops or staircases.

»70 S & 132 S & 110HC «

  • Roll formed Aluminum panels of 70 & 132 mm wide
  • Hunter Douglas® 110HC can be anodized or finished in any desired RAL colour
  • Coil coated with UV and scratch resistant Luxacote® coating, available in 14 standard colors Other colors on request.
  • Stylish carrier rails with sliding brackets allow a variable module by which openness and shading angle can be selected
  • 70S and 132S panels can be combined on one support rail
  • Corner solutions available
  • The (vertical) Hunter Douglas® 70S sun louvres combines multiple functions in a single product: - The Z-shaped panels have been specially developed as a Sun Louvre system for façades exposed to low sun angles - It can also be used as ventilated façade system. Covering for example installations on rooftops or staircases

Data Sheets :70S & 132S (946KB) _ _ 110HC (831KB)

 

 

 

External Blinds :

The external blinds require minimum space for maximum efficiency. the external blind fulfill all basic requirments for low-rise building or in areas with an average windload.

Avilable in two models :

» External Venetian Blinds «

  • Roll formed Aluminum slats of 60, 80 or 88 mm wide.
  • Available in standard colors, other colors on request
  • All profiles are extruded and anodized or power coated into different colors.
  • Two operation : Manual with crank rod and Electric (suitable for control systems).
  • Transfer of heat to interior is minimal, resulting in low shading coefficients.

Data Sheet (2.90MB)

 

» External Roller Blinds «

  • High quality screen fabric with welded edges for maximum fabric strength in Serge..
  • A wide range of fabrics for both external and internal solutions.
  • A wide range of colors.
  • Elegant designed head box system.
  • All profiles are anodized or powder coated to specifications.

Data Sheet (2.80M)

Top